Rubber Plugs, Stoppers & Grommets
MOLDED RUBBER
Rubber Plugs, Stoppers & Grommets
Masking plugs, hole stoppers, end caps and wire grommets — the small parts that finish an assembly. Standard tapers and panel sizes, plus economical custom molding in EPDM, NBR, silicone or natural rubber. Compression, injection or transfer molding — from prototyping and tooling design to mass production.
- Tapered plugs for masking, thread protection and hole sealing
- Panel grommets protect wires and hoses from sharp sheet-metal edges
- EPDM, NBR, VMQ silicone, NR — indoor and outdoor grades
- Custom shapes molded economically at volume
Part Types & Jobs
Four families cover most finishing and protection jobs.
| Part | Job |
|---|---|
| Masking plugs | Paint and powder-coat masking — high-temp silicone grades available |
| Hole stoppers | Sealing unused ports, bores and panel holes |
| Wire grommets | Cable pass-through with edge protection |
| End caps | Thread, tube-end and stud protection in transit and storage |
Where It’s Used
The finishing touch on every assembly.
Powder Coating & Painting
High-temp silicone masking plugs for finishing lines.
Electrical Panels
Grommets for clean, chafe-free cable entry.
Automotive Assembly
Hole plugs and grommets across body and trim.
Furniture & Equipment
Glides, caps and bumpers that finish the product.
Appliances
Grommets and stoppers inside housings.
Construction
Hole sealing and edge protection on site equipment.
Plugs & Grommets FAQ
Yes — silicone masking plugs rated for powder-coat cure ovens. Tell us your cure temperature.
Yes. Tapered plugs are simple tooling and economical even at moderate volumes — send the hole dimensions.
Give us the panel thickness, the hole diameter and the cable diameter — we will match the groove and bore.
Black is standard; EPDM and silicone can be molded in colors for coding or appearance parts.