CNC Turning Seals
MACHINED SEALS
CNC Turning Seals
Lathe-cut precision seals with no mold cost — PTFE, PU, NBR, FKM, nylon and POM turned to your drawing. The fast, economical route for prototypes, urgent spares and large diameters that don't justify tooling.
- No tooling — machined directly from rod, tube and plate stock
- Large diameters and one-offs economically viable
- PTFE, PU, NBR, FKM, PA6/PA66, POM — selected by medium, temperature, pressure and friction
- Tight tolerances held on CNC lathes; every part inspected
Materials & Strengths
One process, many engineering plastics — matched to the duty.
| Material | Strength |
|---|---|
| PTFE | Lowest friction with broad chemical resistance — rotary and static seals |
| PU | Outstanding abrasion resistance for dynamic hydraulic seals |
| FKM | Heat and chemical duty to 200°C+ |
| PA6 / PA66 / POM | Wear rings, guide rings and back-up rings |
| NBR | Economical oil-resistant seals |
Where It’s Used
When you need it fast, or only need a few.
Hydraulic Repair & Spares
Emergency seals for cylinders already in the field.
Prototyping
Test the design before committing to mold tooling.
Large-Bore Cylinders
Diameters where molding tooling makes no sense.
Pumps & Valves
PTFE and PEEK-type spares for process equipment.
Food Machinery
POM and PTFE parts for clean environments.
Industrial Maintenance
One-off replacements to keep lines running.
CNC Seal FAQ
Large bores are the sweet spot of this process — send your diameter and we will confirm.
Without tooling lead time, machined seals are our fastest custom route — ask for the current schedule.
By the dominant failure risk: NBR for oil resistance at moderate temperature and low cost; FKM for high temperature or aggressive chemicals; PTFE for low friction, wide temperature and chemical resistance in rotary service; PU for high pressure, impact and severe abrasion. We also build hybrid designs — PTFE sliding elements with elastomer energizers, or back-up rings against extrusion.