Hydraulic & Rotary Seals

DYNAMIC SEALS
Hydraulic & Rotary Seals

Piston seals, rod seals, wipers, wear rings and rotary lip seals — molded or CNC-machined in PU, FKM, NBR and PTFE composites. Lip geometries are designed with simulation software for the pressure, speed and temperature of your duty, with engineered anti-extrusion designs for zero-leakage service.

  • Complete cylinder kits: piston, rod, buffer and wiper seals plus guide rings
  • PU for abrasion resistance, FKM for heat and chemicals, PTFE composites for low friction
  • Rotary shaft seals for pumps, gearboxes and motors with low-friction lip profiles
  • Reinforced lips and anti-extrusion back-up rings for high-pressure duty
  • Molded for volume, machined for prototypes, spares and large bores

TYPES: Piston · Rod · Wiper
MATERIALS: PU · FKM · PTFE · NBR
SERVICE: High-pressure dynamic
CUSTOM: To drawing

Get a Free Quote

Seal Types & Materials

Each position in a cylinder asks for a different material. This is how we normally combine them.

Seal TypeMaterialDuty
Piston sealsPU / FKMDouble-acting cylinders, high-pressure holding
Rod sealsPU / NBRAbrasion-resistant dynamic sealing on the rod
Wipers / scrapersPUExclude dust, mud and contaminants from the cylinder
Rotary lip sealsPTFE composite / FKMLow-friction sealing on rotating shafts
Wear & guide ringsPA / POMPrevent metal-to-metal contact, guide piston and rod

Where It’s Used

Wherever pressure has to stay in and dirt has to stay out.

Excavators & Loaders

Boom, arm and bucket cylinders in dust and shock loads.

Injection Molding Machines

Precision cylinders with long, leak-free service intervals.

Hydraulic Presses

High-pressure piston and rod sealing for forming equipment.

Agricultural Machinery

Tractors and harvesters — seals that survive the field.

Marine Hydraulics

Deck machinery and steering gear in saltwater environments.

Industrial Cylinders

OEM and replacement seals for cylinder manufacturers.

Hydraulic Seal FAQ

Molded for volume production and complex lip geometries; CNC-machined for prototypes, urgent spares and large bores with no tooling cost.
Yes. Send the worn part or the hardware dimensions — our engineers measure, recommend the material and confirm before production.
PU wins on abrasion resistance for reciprocating rods; PTFE composites win on low friction, speed and chemical resistance for rotary service.
Yes — piston seal, rod seal, wiper and wear rings matched as a kit for your cylinder bore and rod size.
By the duty: PU for abrasion on reciprocating rods, FKM for heat and chemicals, PTFE composites for low friction and rotary speed, NBR for cost-effective oil service. For advanced duties we build hybrid designs — PTFE sliding elements with elastomer energizers, plus back-up rings against extrusion.