FEP / PFA Encapsulated O-Rings

SPECIALTY SEALS
FEP / PFA Encapsulated O-Rings

A seamless FEP or PFA jacket over a resilient silicone or FKM core — the chemical and temperature resistance of a fluoropolymer with the spring-back of rubber. A cost-efficient alternative to FFKM for aggressive media.

  • Seamless FEP/PFA encapsulation — no weld line to fail
  • Elastomer core keeps sealing force where solid PTFE would cold-flow
  • Low-friction jacket reduces wear on mating hardware; very low gas permeability
  • USA and metric cross-sections; nearly unlimited diameters
  • FEP resists virtually all chemicals (except alkaline metals, fluorine and some halogenated compounds at high temperature)

JACKET: FEP · PFA
CORE: Silicone · FKM
FEP TEMP: -60°C to +205°C
PFA TEMP: -60°C to +260°C

Get a Free Quote

Encapsulation & Core Options

Choose the jacket for chemistry and temperature, the core for resilience.

OptionDetail
FEP encapsulationStandard choice to 205°C (260°C short term) — resistant to virtually all chemicals
PFA encapsulationFor service above 205°C — to 260°C (300°C short term)
Silicone core · 70AGeneral-purpose resilience
FKM core · 70AHigher compression-set resistance
Hollow silicone core · 75–80ASofter — for lower clamping force

Where It’s Used

Where chemistry kills ordinary rubber.

Chemical Processing

Strong acids, alkalis and solvents — pipelines, filters, pressure vessels.

Pharmaceutical & Food

CIP/SIP cleaning, valves and reaction vessels.

Semiconductors & Instruments

High-purity fluid and analytical equipment.

Oil & Gas

Sour service and high-temperature wells.

Valves & Pumps

Seats and stem seals in corrosive service.

Food & Beverage

High-temp, chemical-resistant seals for CIP lines.

Encapsulated O-Ring FAQ

Solid PTFE cold-flows under load and loses sealing force. The elastomer core in an encapsulated O-ring keeps constant spring-back for a long-term seal.
Standard cross-sections run economically at moderate volumes; custom sizes are quoted per drawing — ask us.
FEP covers applications up to 205°C and is the standard choice. Choose PFA when service runs above 205°C — it carries the same chemical resistance to 260°C (300°C short term).